Specification:
Features:This sand filter pump with timer is designed to help to keep pool clean and clear of debris. The sand filter can filter 10980 litres per hour and features a durable, corrosion-proof filter tank. It is resistant to acidic influence of chlorinated pool water. It has a built-in timer, you can set desired operating times for 2h, 4h, 6h, 8h, 10h, 16h and 24h. The timer has 2 modes: continuous mode and single-cycle mode. For the continuous mode, pump will operate for the specified amount of hours, then stop. It will repeat this program every day. For the single-cycle model, pump will operate for the chosen amount of hours, then stop. Operating hours can be adjusted easily by pressing the timer button. There is also an additional prefilter to keep dirt out of the coarse sand filter. The top flange clamp design allows 360 degree rotation for easy installation. This pool filter pump is weatherproof and durable, thanks to the reinforced plastic housing. This set includes a fixable base for secure mounting. It is compatible with most above ground pools with a 38 mm port. Note: It can be connected with both diameter 32 mm and diameter 38 mm hoses. Specifications:Colour: Blue and blackMaterial: PlasticDimension: 550 x 480 x 740 mm (W x D x H)Power supply: 220-240 V~, 50 HzPower: 530 WConnection diameter: 38 mmFilter diameter: 38 cm (1in)Flow rate: 7,5 m³/h (32.8GPM)Maximum head: 11 mMaximum pump capacity: 10980 l/hMaximum working pressure: 3,5 barSuitable water temperature: 0-45°CWith a prefilterBuilt-in timer with 2 operation modes: continuous and single-cycleTimer can be set in 2h, 4h, 6h, 8h, 10h, 16h, 24h time periodsRequires 50 kg filter sand (not included)IP level: IPX57-way valve: Filtration, rinse, recirculate, winter, backwash, close, wasteSuitable for hoses with a diameter of 32 mm or 38 mmSuitable for above ground poolsAssembly required: Yes
Product Image: