Product Size

Length: 7.00cm

Width: 5.00cm

Height: 4.00cm

Product Weight

0.145kg

Packing Size

Length: 19.00cm

Width: 15.00cm

Height: 5.00cm

Packing Weight

0.154kg

Replacement Part Number: 28910-3C100 28910-25100 HYUNDAI KIA L4 2.0L / 2.4L

Describe the 3rd product corresponding to the failure problem

1.Solenoid valve terminals loose or wires off, the solenoid valve shall not be energized, you can tighten the wire of the electric actuator. 2.If the solenoid valve is bad (leak), the oil vapor has entered the engine before ignition, resulting in too much oil vapor in the engine, there may be a so-called flooded cylinder, there will be a second fire or ignition powerlessness. 3.Check the solenoid valve that may have problems. If the solenoid valve has been closed, then the gasoline vapor in the carbon tank will gather more and more, and eventually fill the entire carbon tank, the remaining gasoline vapor can only escape into the atmosphere, polluting the environment and wasting fuel

Product optimization and solution points

1.The carbon canister uses the adsorption of activated carbon to collect fuel vapors and avoid waste. The carbon canister solenoid valve is a solenoid valve that opens when the car is started, releasing the adsorbed fuel vapors into the air intake duct and into the engine for combustion. 2.The solenoid valve is made of high quality materials for durability and reliability. The Evaporative Emission Control System (EVAP) prevents fuel vapors from escaping into the atmosphere by collecting and storing them in a canister filled with carbon particles.

 The composition and material quality of the product

1.Made of high quality ABS plastic to withstand the low and high heat operating temperatures of engines while providing longer life and superior performance to ensure a perfect connection to the engine harness, providing peak conductivity for optimal performance and excellent resistance to environmental influences 2.Solenoid valves are made of high quality ABS material for long life, wear and corrosion resistance for optimum durability Each valve is tested prior to shipment to precisely control the amount of fuel vapor exiting the charcoal canister. 3.The high quality ABS plastic is made of silicone over an internally insulated IC chip that can withstand low and high heat engine operating temperatures, resist vibration, and last longer for optimal performance. Longer life with excellent performance High-quality material withstands extreme conditions

Description 4 Solve and help

1.Replace the solenoid valve . It prevents fuel vapor from escaping into the atmosphere and captures fuel vapor from the fuel tank and temporarily stores it in the charcoal canister. It is best to replace the damaged bleed valve in time to avoid fuel vapor leakage, abnormal valve venting and other vehicle problems. 2.Replace the solenoid valve to prevent fuel vapor from escaping into the air and to capture fuel vapor from the fuel tank and store it temporarily in a charcoal canister. It is best to replace damaged bleeder valves in a timely manner to avoid fuel vapor leakage, abnormal valve exhaust, and other vehicle problems. 3.Replacement solenoid valves regulate the flow of fuel vapor released for engine combustion, not just the vapor released into the atmosphere. When your carbon canister purge valve is damaged, it may trigger a code that illuminates the check engine light

Confidence in quality

1.Designed for perfect fit and plug-and-play installation, this solenoid valve installs and functions like the original equipment, is manufactured with quality materials for long life, and each component is tested to ensure proper operation of your vehicle's evaporative emission system. 2.The high quality materials are designed to withstand extreme conditions, reduce temperatures, resist vibration, and are durable for optimum performance. Products are inspected and tested multiple times before leaving the factory to ensure complete suitability for plug-and-play use.

Description 5 Service & Maintenance

1.12 months warranty. If there is any problem during the one-year quality warranty period, please feel free to contact us for a free replacement or refund

Product Tips

1.To avoid mistakes, please double check our product photos to make sure our products are the same as your old parts and have the same sockets. And please make sure your vehicle type is in the parts description on the back. 2.Please note - Please check the car's build model trim engine, product appearance and part number to make sure this is the correct part you need. If you have any questions, please contact us for answers 3.Please double check the connectors and insert your old parts into our pictures to make sure they are the same before purchase. Failure to do so can lead to compatibility issues and easy return issues for Hyundai Azera 2005-2011 for Hyundai Sonata 2005-2010 for Hyundai Entourage 2006-2008 for Hyundai Veracruz 2006-2012 for Hyundai Genesis Coupe (3.8L) 2008-2012 for Hyundai Genesis Sedan (3.8L) 2009-2014 for Hyundai Sonata Hybrid (will not fit a non-hybrid) 2010-2014