Product information :
Fixing method: two-point type
Color: security thread yellow
Installation method:
Disassemble the seat belt decorative plate, take out the retractor, remove the fixing screws at both ends and the signal sensor, pull out the old belt, and use a tool to clamp the retractor to prevent the retractor from retracting. Pick out the cassette head at the end of the old tape, take out the fixing core, cut off the cassette head, and do not let go of the tool that is holding the retractor. The new seat belt is wound into the retractor, the sewing cassette head is placed on the fixing core, and the cassette head is inserted back into the retractor. Do not let go of the tool blocking the retractor. Measure the length of the new seat belt, and install the original car accessories in order. Cut off the old seat belt, connect the original car accessories, and sew. Install it back in the same way as it was removed
Size Information:
Specifications: width 4.8CM, length 3.8 meters/roll
Packing list:
Seat belt*1
Verification Code