Product information:

Material: cardboard + resin diamond
Size: 15*15cm/5.91*5.91" (folded)
Packing size: 300*150*30mm/11.81*5.91*1.18"
Weight: 360g

Features:

DIY diamond painting production steps:
1. Open the box and check the special tools for diamond drawing.
2. Check the color of resin diamonds and arrange them in order of coding.
3. As shown in the figure. Uncover the tape picture above, you will see a lot of symbols corresponding to the color coding.
4. As shown in the figure. Clamp one of the corresponding resin-inlaid diamonds according to the corresponding color code.
5. It is recommended to complete a set of resin diamonds faster.
6. In order to create a perfect diamond painting, put the painting in one place, and each row of symbols does not have to jam the diamond.
7. In order to cut a good figure on the drawing, install the sorted array on the level of the above material.
8. The splicing place should be flat and neat, and there should be no cracks.
9. After finishing, glue the remaining gaps with the corresponding diamond symbols.

Precautions:
1. This is a DIY diamond painting. It's not finished yet. You need to do it yourself.
2. Due to manual measurement, please allow a measurement deviation of 1-3cm.
3. Due to different displays and lighting effects, the actual color of the product may be slightly different from the color shown on the picture. Thanks!

Packing list:

Card*12
Envelope*1
Drill bag*1
Tool bag*1